Special Machine

EXPANDED MEMORY SIZE

Up to 100 designs can be saved to the memory and the capacity includes two million needles.

# MIRROR IMAGE CONVERSION AND DESIGN DIRECTION

The design can be turned by 1° between 0° and 359°. Supports mirror image conversion (X-axis conversion).

ENLARGING AND REDUCING DESIGN

Embroidery design can be increased/decreased by 1% to X or Y axis within the range from 50% to 200%.

GENERAL REPETITION WORK

Same design can be repeated up to 99 times (X, Y axis direction).

SPECIAL REPETITION WORK

Allows repeat work up to 63 times for various designs and can modify the angle and the mirror during the repeat work.

AUTOMATIC OFFSET

To make frame replacement convenient, frame is automatically moved to the offset position after a completion of work. Offset position can be configured from the "Parameter Setting Mode"

MANUAL OFFSET

Manual offset function allows users to manually move the frame to a certain position while embroidering. The function allows convenient applique and frame replacement during the embroidery process. Frame can be moved to its original position afterwards with simple key control.

ORIGIN RETURN

Allows frame to return to its start point during embroidery.

FLOAT STITCH FUNTION

Needle bar can be moved forward or backward in the units of 1, 100, 1000, 10000 needles and color cord without actual embroidery.

FRAME BACKWARD

Allows frame to move to the position where embroidery started from 1 to 10 times when the thread becomes cut or falls off from the frame.

AUTO RETURN TO THE EMBROIDERY STOP POSITION AFTER SUDDEN POWER INTERRUPTION

In case of power outage, frame is automatically returned to the position where embroidery stopped. This function greatly reduces the risk of ruining embroidery from unexpected power outage.

EDIT FUNTION

Edit Function allows users to delete, modify, and/or insert stich data and function code such as jump, end, and trimming.

INDIVIDUAL HEAD OPERATION

Individual Head Control allows users to control each head individually and leave other heads in their original location.

UPPER THREAD HOLDER

Geared motor enables simultaneous operation of all heads, ensuring accurate timing. Minimized motor noise for smooth & stable operation.
Upper thread holder on each head can be individually turned on.

OPERATION BOX

Applied with new Operation Box of slim design and upgrade key type.
Improvement of CPU Processor.
Improved function for input and output of designs through USB Mass Storage Device.
Support LAN and CAN network.
Applied On-Board System to which Memory Card is included on CPU Card.
Applied unification I/O Board.
External FDD.
Simple and convenient wiring for improvement of service and maintanence.

ANTI-VIBRATION FUNCTION

All types of machines are equipped with anti-vibration gear.
Enhanced safety enables high-quality embroidery work.

X-Y DRIVE

AC servo motor for X-Y drive : super preision control.

UPPER THREAD HOLDING SYSTEM

Prevents unthreading in the heads stopped during embroidery.
Higher productivity.

JUMP

No big drop of speed during high-speed jumps : high productivity.

THREAD TENSION ADJUSTING PLATE

New plate structure and thread way.
Reduced load on thread compared to old version.
Stable thread flow and smooth thread way.

FRAME

Light and stronger frame ensures higher quality embroidery.

BODY

Light and durable one-beam-type structure.

CONTROL BOX

Applied with Control Box of improved stablization of power system and convenience of maintenance.
Easy connection of Main power input wiring and Simplication of output power.
Equiped with high-capacity Noise Filter and Surge Protector for controller protection and satety stablization.
XY Driver are included in Control Box for High efficiency of signal forwarding and convenience of maintenance.
Simplification of DC voltage supply.
Trim Driver is included on Joint Board.
Applied with Lock Type Connector for convenience of maintenance and reduction of trouble.
Increased reliability of improved new ventilation.

POWER MONITORING & BLOCKING SYSTEM

Detects errors in power and displays current power status or blocks unstable power to protect controller
Features magnetic switch in addition to main switch to secure stability
Reduces unnecessary wiring

CONTROL BOX

Internal X,Y-Driver
Improved signal transferability following shortened cable length
Easy to check driver status
Installed internal Control Box that we espect enhanced work and A/S efficiency.

OPERATION BOX

Enhanced key-type operation box
Large 10.4" Graphic TFT LCD monitor
Communication-type easy control for convenient work
Supports 2DD/2HD FDD, USB Memory Stick, LAN
Multi-language support
Touch Screen (Option) Operation Box
Improved CPU Clock
Improved reliability with fan application