SWF Used Machine
|Speed||Max. : 1500 rpm|
|Motor||Main||AC Servo Motor x 1|
|X-Y||AC Servo Motor x 2|
|Power Consumption||2.7 kW|
|Lubrication System||Semi-auto Lubrication System|
|Operation Box||Color LCD Screen|
|Memory||Capacity||Standard : 4,000,000 STITCH|
|Media||2HD 3.5" Floppy Disk, USB|
|Sewing Field||Normal (UK)||500 x 450 mm|
|19.68 x 17.71 inch|
|Normal (UH)||400 x 450 mm|
|15.74 x 17.71 inch|
|Cap||360 x 75 mm|
|14.17 x 2.95 inch|
EXPANDED MEMORY SIZE
Up to 100 designs can be saved to the memory and the capacity includes two million needles.
MIRROR IMAGE CONVERSION AND DESIGN DIRECTION
The design can be turned by 1° between 0° and 359°. Supports mirror image conversion (X-axis conversion).
ENLARGING AND REDUCING DESIGN
Embroidery design can be increased/decreased by 1% to X or Y axis within the range from 50% to 200%.
GENERAL REPETITION WORK
Same design can be repeated up to 99 times (X, Y axis direction).
SPECIAL REPETITION WORK
Allows repeat work up to 63 times for various designs and can modify the angle and the mirror during the repeat work.
To make frame replacement convenient, frame is automatically moved to the offset position after a completion of work. Offset position can be configured from the "Parameter Setting Mode"
Manual offset function allows users to manually move the frame to a certain position while embroidering. The function allows convenient applique and frame replacement during the embroidery process. Frame can be moved to its original position afterwards with simple key control.
Allows frame to return to its start point during embroidery.
FLOAT STITCH FUNTION
Needle bar can be moved forward or backward in the units of 1, 100, 1000, 10000 needles and color cord without actual embroidery.
Allows frame to move to the position where embroidery started from 1 to 10 times when the thread becomes cut or falls off from the frame.
AUTO RETURN TO THE EMBROIDERY STOP POSITION AFTER SUDDEN POWER INTERRUPTION
In case of power outage, frame is automatically returned to the position where embroidery stopped. This function greatly reduces the risk of ruining embroidery from unexpected power outage.
Edit Function allows users to delete, modify, and/or insert stich data and function code such as jump, end, and trimming.
INDIVIDUAL HEAD OPERATION
Individual Head Control allows users to control each head individually and leave other heads in their original location.
MODIFIED TAKE-UP LEVER DRIVE CAM
Damages made to cam are greatly reduced by applying steel cam follower to outer part of take-up lever
POWER MONITORING & BLOCKING SYSTEM
Detects errors in power and displays current power status or blocks unstable power to protect controller
Features magnetic switch in addition to main switch to secure stability
Reduces unnecessary wiring
Improved signal transferability following shortened cable length
Easy to check driver status
Installed internal Control Box that we espect enhanced work and A/S efficiency.
Enhanced key-type operation box
Large 10.4” Graphic TFT LCD monitor
Communication-type easy control for convenient work
Supports 2DD/2HD FDD, USB Memory Stick, LAN
Touch Screen (Option) Operation Box
Improved CPU Clock
Improved reliability with fan application